By David Wagner Most people take for granted the markings in the parking since many imagine it to be an easy process just like painting on...
Most people take for granted the markings in the parking since many imagine it to be an easy process just like painting on other faces. On the contrary, marking parking spaces is an arduous task that takes a lot of time to plan in order to ensure safety of the people using them. A lot of planning is needed to make sure that the aesthetics of the establishment are enhanced and at the same time comply with federal and local laws governing the industry. When one needs Striping Houston offers the perfect location to visit.
It is important to hire a professional because the process of parking lot marking involves many steps than it is usually thought and is complicated too. People should employ companies with the correct labor, technical expertise, equipment, and experience. The contractor should understand the federal and local laws properly so that compliance can be ensured.
The process of marking the space usually starts with surface preparation. It is important that the surface is prepared properly to ensure that the paint that is applied adheres properly to the surface. In case there is dirt on the surface, it will need to be removed using various methods. Using a high pressure washer can help in removing most kinds of dirt.
With the prepared surface ready for application of paint, the team must then start planning how and where to apply the lines. One may choose to design the aisle so that it allows for one-way or two-way traffic. The flow of traffic in the area as well as the size of space may determine if the aisle is designed to be one-way or two-way.
The plan must entail consideration of the safety of both drivers and pedestrians. In order to avoid collision, space in the parking lot should be sufficient. These spaces ought to be adequately broad so that drivers are able to move in and out with convenience. The length and width of spaces that cars are parked in are normally determined by federal and local standards.
This job can be done using several types of paints. The type of paint that should be used is usually determined by the type of surface being painted. Sealed or new asphalt pavements always work well with paints that are water-based. On the other hand, paints that are rubber-based work best on pavements made using concrete. One should research to ensure that they use the correct paint because there are many other types of paints and surfaces.
The paint used on parking lots is subjected to surface wear and tear, which removes it over time as the space is used. Spaces that experience heavy traffic usually wear out sooner than those with little traffic. In general, the lot will require to be repainted after every two years. The general rule used in this industry is to apply new paint if the general visibility of the paint reduces by 25 percent.
Usually, the paint dries very quickly. For the paint to dry completely, it might just take 30 minutes. However, the lot must not be opened to traffic until one hour is over. This serves as a precaution. The reason for this is that some spots might not have dried totally after 30 minutes.
It is important to hire a professional because the process of parking lot marking involves many steps than it is usually thought and is complicated too. People should employ companies with the correct labor, technical expertise, equipment, and experience. The contractor should understand the federal and local laws properly so that compliance can be ensured.
The process of marking the space usually starts with surface preparation. It is important that the surface is prepared properly to ensure that the paint that is applied adheres properly to the surface. In case there is dirt on the surface, it will need to be removed using various methods. Using a high pressure washer can help in removing most kinds of dirt.
With the prepared surface ready for application of paint, the team must then start planning how and where to apply the lines. One may choose to design the aisle so that it allows for one-way or two-way traffic. The flow of traffic in the area as well as the size of space may determine if the aisle is designed to be one-way or two-way.
The plan must entail consideration of the safety of both drivers and pedestrians. In order to avoid collision, space in the parking lot should be sufficient. These spaces ought to be adequately broad so that drivers are able to move in and out with convenience. The length and width of spaces that cars are parked in are normally determined by federal and local standards.
This job can be done using several types of paints. The type of paint that should be used is usually determined by the type of surface being painted. Sealed or new asphalt pavements always work well with paints that are water-based. On the other hand, paints that are rubber-based work best on pavements made using concrete. One should research to ensure that they use the correct paint because there are many other types of paints and surfaces.
The paint used on parking lots is subjected to surface wear and tear, which removes it over time as the space is used. Spaces that experience heavy traffic usually wear out sooner than those with little traffic. In general, the lot will require to be repainted after every two years. The general rule used in this industry is to apply new paint if the general visibility of the paint reduces by 25 percent.
Usually, the paint dries very quickly. For the paint to dry completely, it might just take 30 minutes. However, the lot must not be opened to traffic until one hour is over. This serves as a precaution. The reason for this is that some spots might not have dried totally after 30 minutes.
About the Author:
You can find a detailed list of the advantages and benefits of using professional parking lot striping Houston services at http://www.semperstriping.com right now.
Aucun commentaire