By Pamela Brooks The sun is the most natural heater in our universe. The combustion of gases created by the sun warms the earths surface s...
The sun is the most natural heater in our universe. The combustion of gases created by the sun warms the earths surface so that even when it's cold, the heat that radiates from it warms you. In much the same way the gas fired infrared heaters Ohio suppliers sell generate heat with the use of fuel and warms the objects below it, like floors, machinery, tools, and people. The objects that are warmed release heat into the air and make it warmer.
This system is perfect for industrial manufacturers that operate in warehouses that are large, open, and high ceilinged. These warehouses have traditionally been heated with forced air. These heating systems are built into the warehouse ceilings and blow out hot air at the rate of a 747 engine. It usually does an adequate job, but is inefficient and costly. By contrast, infrared heat systems are 50% more efficient.
This heating method can be low or high intensity. High intensity has been on the scene for almost three quarters of a century. It requires a high mounting and operates with the use of an open flame. Reflectors are used to direct the source of the heat. This method can be effective if there are only a few workers in an area that isn't vented.
Low intensity heat systems generate radiant heat just like the sun. They are hung from the ceiling by chains. You can get them vented or unvented. If necessary outside air can be used for combustion. The rate of heat is controlled by a thermostat. The design allows for different configurations depending on the space requirements.
There is an enclosed flame in allow intensity heater. When heat is necessary, the burner box ignites a mixture of gas and air which pushes through a tubing with the use of a fan. The gas heats the tube which emits energy that is directed by reflectors onto the floor. The objects in the way of the reflected heat warm the area and create a comfort level. This type of heating begins at the ground level rather than the ceiling to create the warmth in the space.
If you have a forced heat system, the heat will escape each time a door is opened. When that happens the system must start all over to heat the space. With infrared heat, the heat that comes from the floor acts like a reservoir. It will retain extra heat and continues to warm the space until the heat that was lost from the door opening is negligible.
There are a lot of advantages to using this kind of system. The money you save is one of the most important. These heating systems are as much as 50% more cost effective than forced air systems. Since they do not operate with blowers, the systems are quieter and cleaner. Dust and debris will not be blowing around the warehouse. They can also operate independently or in a zoned capacity.
It is very important to take safety into consideration when using these heating systems. Objects that have lower temperature ratings have to kept at a safe distance from these heating units. Lighting, electrical and gas lines, and parked vehicles have to be protected from the system.
This system is perfect for industrial manufacturers that operate in warehouses that are large, open, and high ceilinged. These warehouses have traditionally been heated with forced air. These heating systems are built into the warehouse ceilings and blow out hot air at the rate of a 747 engine. It usually does an adequate job, but is inefficient and costly. By contrast, infrared heat systems are 50% more efficient.
This heating method can be low or high intensity. High intensity has been on the scene for almost three quarters of a century. It requires a high mounting and operates with the use of an open flame. Reflectors are used to direct the source of the heat. This method can be effective if there are only a few workers in an area that isn't vented.
Low intensity heat systems generate radiant heat just like the sun. They are hung from the ceiling by chains. You can get them vented or unvented. If necessary outside air can be used for combustion. The rate of heat is controlled by a thermostat. The design allows for different configurations depending on the space requirements.
There is an enclosed flame in allow intensity heater. When heat is necessary, the burner box ignites a mixture of gas and air which pushes through a tubing with the use of a fan. The gas heats the tube which emits energy that is directed by reflectors onto the floor. The objects in the way of the reflected heat warm the area and create a comfort level. This type of heating begins at the ground level rather than the ceiling to create the warmth in the space.
If you have a forced heat system, the heat will escape each time a door is opened. When that happens the system must start all over to heat the space. With infrared heat, the heat that comes from the floor acts like a reservoir. It will retain extra heat and continues to warm the space until the heat that was lost from the door opening is negligible.
There are a lot of advantages to using this kind of system. The money you save is one of the most important. These heating systems are as much as 50% more cost effective than forced air systems. Since they do not operate with blowers, the systems are quieter and cleaner. Dust and debris will not be blowing around the warehouse. They can also operate independently or in a zoned capacity.
It is very important to take safety into consideration when using these heating systems. Objects that have lower temperature ratings have to kept at a safe distance from these heating units. Lighting, electrical and gas lines, and parked vehicles have to be protected from the system.
About the Author:
For a closer look at the benefits of gas fired infrared heaters Ohio customers should turn to our recommended homepage and read all the information. Find what you need right here at http://www.westernreserveenergy.com/products.
Aucun commentaire